MSRP Starting from $27,883$27,883$27,883$27,883$27,883$27,883$28,163$27,883$27,883$27,883$27,883$27,883$27,883$27,883

A REVOLUTION IN INNOVATION
The Word of the Day is “Excitement.” The DF200SS joins the Suzuki SS Series with an edgy Matte Black paint job and striking Red cowling graphics. This Fuel Injected 4 Stroke will deliver a powerful hole shot, strong mid-range punch and exhilarating top end. And your wallet will appreciate increased fuel economy with the Suzuki Lean Burn System. Bottom line, you won’t find more power, more advanced technology or a more compact package anywhere. Get on down to the local Suzuki Marine Dealer to be the first one on your block with a DF200SS.
The DF200SS is an “In Line” four-stroke outboard is packed with technology. This four-stroke engine has large displacement, lots of torque and plenty of power. This four stroke engine is a clean runner and certified with a 3-Star Ultra-Low Emission rating from the California Air Resources Board (CARB) and has also met the EPA 2010 standard. So if you want to run with a proven winner, go four-stroke. Go Suzuki.

Water Detecting System
Water in the fuel can lead to problems that include poor combustion, lower power output, and corrosion. The Suzuki Water Detecting System is designed to help protect the engine from moisture in the fuel utilizing a water detecting fuel filter to alert the operator with both visual and audio warnings when water is present in the fuel. The filter is also designed to let you check for water visually.
2-Stage Gear Reduction System
These outboards also incorporate two-stage gear reduction designed to take maximum advantage of the power produced by these high-performance engines. Providing a final drive ratio of 2.50:1 ꟷ the largest you can find in either of these outboard classes ꟷ it delivers powerful torque for quick acceleration and great top-end speed.

Variable Valve Timing (VVT)
Variable Valve Timing is utilized on many of Suzuki’s high-end outboards to deliver high performance across the outboard’s full powerband while retaining the benefits that four-stroke technology provides. The system starts with an innovative cam profile designed for delivering maximum output and performance at high rpm. Variable Valve Timing is used to vary intake timing with the camshaft to optimize timing for low to mid-range operation. This allows the engine to deliver maximum power output across its entire operating range producing greater low to mid-range torque for powerful acceleration. The entire process happens automatically leaving you to enjoy the power and performance.

Multi-Stage Induction (MSI)
Getting the right amount of air into the cylinder has a great impact on performance. High-speed operation typically requires a greater volume of air, low-speed less. Suzuki’s Multi-Stage Induction system meets these needs by utilizing two intake manifold pipes per cylinder to ensure the engine gets the right amount of air. At low rpm, air enters the combustion chamber through a longer, curved manifold pipe designed to improve combustion and boost low-end torque. As rpm increases, the valves open on the direct intake pipes. Shorter and lacking resistance, these pipes allow a greater volume of air into the chamber, increasing the engine’s ability to breathe efficiently at high rpm resulting in higher power output during high-speed operation.

Offset Drive Shaft
Pioneered by Suzuki, the use of the offset drive shaft on four-stroke outboards has long been utilized to reduce the size of the outboard. Found on all Suzuki four-strokes from the DF70A and up, this design positions the crankshaft in front of the drive shaft simultaneously moving the outboard’s center of gravity forward. While the design contributes greatly to the outboard’s overall compactness and increased power performance, it also moves the engine’s axis of inertia, the point where engine vibrations are at a minimum, up over the upper engine mount, thus greatly reducing vibration. These outboards also incorporate two-stage gear reduction designed to take maximum advantage of the power produced by these high performance engines. Providing a final drive ratio of 2.50:1 the largest you can find in either of these outboard classes’ it delivers powerful torque for quick acceleration and great top-end speed.

Suzuki Lean Burn Control System
The Suzuki Lean Burn Control System is an intelligent fuel delivery system that achieves remarkable improvements in fuel consumption making fuel-efficient four-stroke outboards even more economical. Monitoring engine performance and operating conditions in real time, the system uses the 32-bit onboard ECM to predict fuel needs and deliver a leaner, more precise fuel mixture across the outboard’s operating range. The results show significant improvements in fuel economy across the entire powerband, including the cruising range where the engine is used a majority of the time. Comparing the new DF200SS with the original V6 DF200, tests show up to a 19% increase in fuel efficiency mainly in the cruising range (around 70% of its maximum speed).

Tilt Limit System
To protect the boat and motor from damage that can occur when tilting the motor, both outboards incorporate a user adjustable tilt limit switch that prevents the outboard from tilting beyond a predetermined point.
DF200A Boat Test
View Boat Test PDF Here

Offset Driveshaft
Pioneered by Suzuki, the use of the offset drive shaft on four-stroke outboards has long been utilized to reduce the size of the outboard. Found on all Suzuki four-strokes from the DF70A and up, this design positions the crankshaft in front of the drive shaft simultaneously moving the outboard's center of gravity forward. While the design contributes greatly to the outboard's overall compactness and increased power performance, it also moves the engine's axis of inertia, the point where engine vibrations are at a minimum, up over the upper engine mount, thus greatly reducing vibration. These outboards also incorporate two-stage gear reduction designed to take maximum advantage of the power produced by these high-performance engines. Providing a large final drive ratio, it delivers powerful torque for quick acceleration and great top-end speed.

2-Stage Gear Reduction
This system which incorporates the Offset Driveshaft features a first stage reduction between the crankshaft and driveshaft, and a second stage reduction inside the gear case. This design makes a larger gear ratio possible, allowing it to turn a large diameter propeller. Advantage: High propulsive efficiency with large diameter propeller, Powerful navigation, maintaining propeller rotation even with a larger load and increased power to turn large diameter propellers, offering quick acceleration.

Multi-stage Induction
Getting the right amount of air into the cylinder has a great impact on performance. High-speed operation typically requires a greater volume of air, low-speed less. Suzuki's Multi-Stage Induction system meets these needs by utilizing two intake manifold pipes per cylinder to ensure the engine gets the right amount of air. At low rpm, air enters the combustion chamber through a longer, curved manifold pipe designed to improve combustion and improve low-end torque. As rpm increases, the valves open on the direct intake pipes. Shorter and lacking resistance, these pipes allow a greater volume of air into the chamber, increasing the engine's ability to breathe efficiently at high rpm resulting in higher power output during high-speed operation.

VVT - VARIABLE VALVE TIMING
Suzuki's engineers designed the 4.0-liter V6 engine and other models with an aggressive cam profile that delivers maximum output and performance at high rpm. In coupling this cam profile with Suzuki's advanced Variable Valve Timing (VVT), the DF300AP/250AP and other models delivers the additional torque that outboards need for accelerating in the low to mid-range. VVT achieves this by adjusting the timing of the intake valves, allowing them to open before the exhaust valves are fully closed, creating a momentary overlap in the timing where both sets of valves are open. Using VVT, this overlap can be increased or decreased by altering intake timing with the camshaft resulting in optimum timing for low and mid-range operation.

Lean Burn
Suzuki's innovative Lean Burn Control System was first introduced on the DF90A/80A/70A to great acclaim from boaters and the media alike. It predicts fuel needs according to operating conditions allowing the engine to run on a more efficient fuel mixture through the use of a lean air-fuel ratio. It delivers its benefits over a wide operating range, providing significant improvements in fuel economy from low-speed operation into the cruising range. Combining this system with the Suzuki Precision Control electronic throttle and shift system allows the operator precise control over engine RPM for improved fuel economy over a wider operating range. This combination also delivers smooth power transitions throughout the entire RPM range. In-house testing shows that while cruising, the DF300AP is 14% more economical than the original non-Lean Burn DF300 without sacrificing any power of the original DF300.

Anti-Corrosion Finish
To guard against corrosion, Suzuki protects its outboards with its own specially formulated Suzuki Anti-Corrosion Finish. Applied directly to the outboard's aluminum alloy, this finish provides maximum bonding of the finish to the aluminum surface. Layering an epoxy primer undercoat, black metallic (or white) finish, and clear acrylic fiber finish on top of this forms an effective treatment against corrosion, protecting those parts of the outboard's aluminum alloy that are constantly exposed to saltwater.

Water Detecting System
Water in the fuel can lead to problems that include poor combustion, lower power output, and corrosion. The Suzuki Water Detecting System is designed to help protect outboard motors from moisture in the fuel utilizing a water detecting fuel filter to alert the operator with both visual and audio warnings when water is present in the fuel. The filter is also designed to let you check for water visually.

Quiet Operation
Suzuki four-stroke outboards have long been noted for their exceptionally quiet operation. Suzuki engineers go to great lengths incorporating methods designed to keep outboard operation as quiet as possible.

Tilt Limit System
A tilt limit system that prevents the outboard from tilting beyond a certain angle to prevent contact with certain boats.

Troll Mode System
The Suzuki Troll Mode System is optionally available on most 40 horsepower and larger outboard motors. This system provides finer control over engine speed at low rpms keeping the boat moving at a steady speed while trolling. When the system is engaged, engine speed is controlled with an independent control switch that adjusts engine revs in 50rpm increments. In addition to the control switch, which can be mounted nearly anywhere on the console, the system includes a tachometer and is compatible with Suzuki’s SMIS digital gauges or the dual scale analog gauges.
Expand All
Transom Height | L: 20 X: 25 |
Starting System | Electric |
Weight | L: 520 X: 531 |
Engine Type | DOHC 16-Valve |
Fuel Delivery System | Multi Point Sequential Electronic Fuel Injection |
Piston Displacement | 2867 (cc) |
Bore x Stroke | 97 x 97 |
Max Horse Power Output | 200 |
Operating Range | 5500 - 6100 (RPM) |
Steering | Remote |
Oil Pan Capacity | 8.5 (8.0) (L) |
Ignition System | Fully-transistorized |
Trim Position | Power Trim and Tilt |
Gear Ratio | 2.50:1 |
Standard Propeller | Optional |
Propeller Selection | Please inquire at your local dealer for options on propellers. |
60 month warranty ( includes 36 month factory warranty plus 24 month promotion warranty)
Expand All
-
DF150-DF300AP Propeller
$647.73 – $1,241.95
-
Marine Semi-Syn 10W40 Oil
$11.95 – $44.95
-
Marine Maintenance Kit
$43.97 – $281.19
Why the Suzuki Protection Plan
Peace of mind, while adding value, Suzuki Protection Plan (SPP) is there for you. See specifications for details regarding factory warranty.
**Restrictions apply. See Dealer for full details. Valid on eligible current dealer inventory. While supplies last - no rain checks.**
My Province:
Cash |
|
MSRP * | -- |
Retail Incentive | -- |
PDI, Levies, & Environmental Fee ** | -- |
Freight (Includes Logistics Surcharge) *** | -- |
Accessories | -- |
Additional Option | -- |
Extended Warranty (Suzuki Protection Plan) | -- |
Sales Tax | -- |
This is a non-user editable field, please ignore.
Find My Suzuki* Prices of products on the Site are the Manufacturer’s Suggested Retail Price (“MSRP”) and are quoted in Canadian Funds. The MSRP does not include, if applicable, any title and registration fees, dealer pre-delivery and administrative charges, license fees, consumer rebates or incentives, dealer added options, destination and delivery charges, environmental charges or fees or any other additional costs. The MSRP is subject to change at any time without notice. Suzuki dealers who sell the same products through their dealerships are under no obligation to sell any product or service at the suggested prices posted on this Site and may sell for less. Suzuki is not responsible for the prices set by any dealer. All Suzuki dealers are independent businesses authorized to sell Suzuki products. The dealers are not affiliates of Suzuki or any Suzuki affiliate. An estimate of the additional fees charged by dealers in Quebec is available in the Price & Build tool. For all other provinces and territories, please contact a dealer for more information.
** This is an estimate. Contact dealer for actual amount.
* Prices of products on the Site are the Manufacturer's Suggested Retail Price ("MSRP") and are quoted in Canadian Funds. The MSRP does not include, if applicable, any title and registration fees, dealer pre-delivery and administrative charges, license fees, consumer rebates or incentives, dealer added options, destination and delivery charges, environmental charges or fees or any other additional costs. The MSRP is subject to change at any time without notice. Suzuki dealers who sell the same products through their dealerships are under no obligation to sell any product or service at the suggested prices posted on this Site and may sell for less. Suzuki is not responsible for the prices set by any dealer. All Suzuki dealers are independent businesses authorized to sell Suzuki products. The dealers are not affiliated of Suzuki or any Suzuki affiliate. An estimate of the additional fees charged by dealers in Quebec is available in the Price & Build tool. For all other provinces and territories, please contact a dealer for more information.</span>
** This is an estimate. Contact dealer for actual amount.
* Prices of products on the Site are the Manufacturer’s Suggested Retail Price (“MSRP”) and are quoted in Canadian Funds. The MSRP does not include, if applicable, any title and registration fees, dealer pre-delivery and administrative charges, license fees, consumer rebates or incentives, dealer added options, destination and delivery charges, environmental charges or fees or any other additional costs. The MSRP is subject to change at any time without notice. Suzuki dealers who sell the same products through their dealerships are under no obligation to sell any product or service at the suggested prices posted on this Site and may sell for less. Suzuki is not responsible for the prices set by any dealer. All Suzuki dealers are independent businesses authorized to sell Suzuki products. The dealers are not affiliates of Suzuki or any Suzuki affiliate. An estimate of the additional fees charged by dealers in Quebec is available in the Price & Build tool. For all other provinces and territories, please contact a dealer for more information.
** All In Price includes engine preparation only. Rigging and installation are extra cost.
*** This is an estimate. Contact dealer for actual amount.
-
Temporarily out of stock
Marine Semi-Syn 10W40 Oil
$11.95 – $44.95
-
Temporarily out of stock
DF150-DF300AP Propeller
$647.73 – $1,241.95
-
Temporarily out of stock
Marine Maintenance Kit
$43.97 – $281.19